EVOLUTION.
The single-line DJ booth.
DJ furniture that covers the gear when you're not using it: hidden cabling, high-gloss lacquer and space for your whole DJ setup — two turntables or CDJs and a mixer.
Build your EVOLUTION.
Choose laptop stand and destination. The interior space measures 1350 × 460 × 140 mm: check your gear against those measurements.
High-gloss white finish
No colour matches your search.
Colours are approximate: on screen they don't look exactly like the lacquered finish.
Provisional rate, to be confirmed with the carrier.
21% VAT included. Shipping is already included in the total.
DJ furniture, reduced to a single line.
EVOLUTION is the ideal solution if you don't want your DJ gear on show when it's not in use: a modern DJ table that looks good in any corner, with a lid that keeps the dust off. It has 4 built-in audio cable outlets, so the connections are never visible — as good-looking as it is practical.
Hardened high-gloss lacquer
Looks like day one and wipes clean in seconds.
4 outlets, zero visible cables
Four audio cable outlets built into the rear base: the connections are never visible.
1350 × 460 × 140 mm + lid
Interior space sized for a full DJ console: two turntables or CDJs and a mixer, with a lid that covers them when not in use. Also available in other sizes on request, to fit different gear.
Laptop stand
Available as an accessory, in 1 cm thick clear acrylic.
Made in Spain since 2005.
MÖDEK has spent 21 years designing and building its own products, with the best materials on the market and specialists in the trade. Every booth is cut on a CNC router from curved MDF, then lacquered and hardened by hand — the same process used for high-end kitchen fronts, not for flight cases.
That is why the corners are a continuous curve instead of a mitred joint, and why the finish still looks like day one after years of load-ins. We do not keep stock: each EVOLUTION is cut, lacquered and packed for one order, and ships in 15 to 20 working days.
Shipped flat. Assembled in minutes.
EVOLUTION ships as a 3-piece kit that folds down to 140 × 50 × 50 cm, so it fits through a normal doorway and up a staircase. It is designed so that one person can assemble and move it on their own: none of the three pieces weighs more than 20 kg. No specialist tools, no second pair of hands.
That is also why shipping costs what it costs. A DJ booth sent assembled travels as oversized freight; ours travels as a flat crate, and the saving is in your quote, not in ours. Shipping is calculated by destination in the configurator above, with no surprises at checkout.
Where an EVOLUTION ends up.
Most of ours are not in clubs. They are in living rooms, kitchens and bars where the DJ setup has to disappear when the set is over: the lid goes down and what is left is a clean white console that nobody reads as equipment.
Home DJs use it as the one piece of furniture their partner will accept in the living room. Bars and restaurants use it as a counter six nights a week and as a DJ booth on the seventh. Record shops use it as a display table. And it has been on a yacht deck more than once.
The same body, in whichever finish suits your booth best.
€3,025 — VAT included (21%). Shipping not included.
Laptop stand (optional): €240 — VAT included (21%). Ordered together with the booth, shipping is included.
1850 × 500 × 1050 mm (W × D × H).
1350 × 460 × 140 mm + lid. Other sizes available on request.
3-piece kit. One person can assemble and carry it.
Folds down to 140 × 50 × 50 cm for transport.
Approximately 50 kg in total. No single piece over 20 kg.
Hardened high-gloss white lacquer. Any other RAL colour: +€200, VAT included.
Questions we get asked.
Will my turntables and mixer fit?
The interior space is 1350 × 460 × 140 mm. Two Technics-size turntables and a standard mixer fit with room to spare. Measure your gear against those numbers — if it does not fit, EVOLUTION PRO is machined to your exact models.
How long does it take?
15 to 20 working days from the moment the configuration is confirmed, plus transit. We do not ship from stock: yours is cut and lacquered for your order.
Can I have it in another colour?
High-gloss white is the standard finish and the most requested. Any RAL colour is available for +€200, VAT included — pick it when you configure your order.
Do I need tools to assemble it?
No. It arrives as three pieces and goes together by hand in a few minutes.
What if my gear changes?
The interior of EVOLUTION is an open space, not a cut-out, so it takes whatever you replace it with. That is the trade-off against EVOLUTION PRO.